CNC Turning Capabilities

Three advanced Mazak Integrex multi-tasking machines deliver true done-in-one performance, combining full turning centers with high-powered machining centers to complete the most complex parts in a single setup — no secondary operations required.

Key Equipment

Mazak Integrex J-400 – High-torque turning + high-speed milling B-axis -30° to +190° | True Y-axis | Large tool magazine | Programmable NC tailstock

Mazak Integrex 300-IV – Versatile multi-tasking for medium/large parts 60" max length | 30" swing | Y-axis ±4.53" | Secondary spindle | 40-tool ATC | Full C-axis contouring

Mazak Integrex 300-III S – Dual-turret simultaneous machining 12,000 RPM milling spindle | Second spindle hand-off | Maximum throughput with minimal cycle time

Hyundai Wia 4000MC – Robust turning + live milling center 12,000 RPM milling spindle | Full C-axis contouring | Y-axis travel | 40-tool ATC | Bar capacity up to 4" (102 mm) | Max turning diameter 21.6" (550 mm) | Max turning length 83" (2,100 mm)

HiCell 23ii – High-productivity CNC turning centre with live tooling and Y-axis capability | 8–10" chuck | Bar capacity up to ~2.6" (65 mm) | Max turning diameter ~8.5–10" | Max turning length ~20" (500–530 mm) | Y-axis travel ±2.36–4.7" (±60–120 mm) | C-axis contouring | 10–12 station turret + 12-station ATC for milling tools | Live tooling up to 3,000–4,000 RPM | Main spindle 30–4,000 RPM

Okuma Genos L250 – High-precision CNC turning centre. | Main spindle 5,000–6,000 RPM | Bar capacity up to ~2"–2.6" | Max turning diameter ~8.66"–11.02" (220–280 mm) | Max turning length ~11.8"–19.7" (300–500 mm) | 12 station turret (V8/V12)

Milling Capabilities

Our full-service milling department combines advanced HAAS machinery with proven expertise to tackle the most demanding projects — from ultra-precise prototypes to high-volume production runs with exceptional speed, accuracy, and repeatability.

Key Equipment

HAAS VF-6SS – High-performance super-speed 3-axis VMC for large parts and high-volume production | 15,000 RPM inline direct-drive spindle | 64" × 32" × 30" travels | High-speed rapids | Side-mount tool changer

HAAS UMC-750 – Full simultaneous 5-axis universal machining center | 12,000 RPM spindle (inline direct-drive) | 30" × 20" × 20" linear travels | 500 mm trunnion platter | +110° / -35° B-axis tilt (A-axis 360° continuous)

HAAS DT-1 – Compact high-speed drill/tap center with full milling capability | 15,000 RPM BT30 inline direct-drive spindle (high-torque rigid tapping) | 20" × 16" × 15.5" travels | 20+1 side-mount tool changer | 2,400 ipm rapids